Fishing Frenzy

The earliest attempt of Inflatable Boats were observed by ancient carved images of animal skins filled with air being used as one-man floats to cross rivers. These were before the days of air compressors so they were inflated by mouth. Often these images were mistaken for early scuba gear, but in fact they were the first generation of Inflatable Boats.

In the days of Arthur Wellesley, the first Duke of Wellington in 1839, the Duke had conducted tests on the times version of the Inflatable in a Pontoon fashion. In years to follow just after the turn of the century, modern advances of the time in the rubber industry allowed the first version of an Inflatable Rubber Raft. Unfortunately, while state of art for the day, there were still many flaws in the production and the rafts developed splits in the seams due to inferior, by today's standards, in the production process.

The loss of the Titanic in 1912 and the ensuing WW1 and the losses of many war ships that fell casualty to the indefensive tendencies to the submarine torpedo, Rubber Rafts gained popularity. The main reason for such a loss of like on the Titanic was due to the unthinkable fact that there were less than half the necessary lifeboats aboard her than were necessary for each person aboard to have a space.

This disaster was shortly there after created the initial SOLAS treaty to avoid such catastrophes again. The main premise of the SOLAS treaty was to ensure that there were adequate numbers of lifeboats aboard all vessels so that every person had a space on a life boat in the event of an emergency. [http://www.imo.org/Conventions/contents.asp?topic_id=257&doc_id=647]

Cargo ships did not have a difficulty in meeting the new standards at the time as they did not carry many hands on these vessels; however War Ships and Passenger Liners had a very difficult task at hand. For the Passenger Liners to accommodate this had to stack the lifeboats where ever they could in order to meet the new requirements.

Goodyear had discovered a way to better manufacture the Inflatable Boats in between the two World Wars but unfortunately, the conservative though of the time held back its production. The inflatable boats that get produced were life rafts of square-shaped inflated rubber cylinders with a rigid floor. These inflatable rafts were stacked vertically aboard warships on deck.

A man named Pierre Debroutelle designed a new version of the Inflatable Boat in 1937. This model was the premier model with the now traditional U-Shaped inflatable tube. His design was so innovative that it was the first Inflatable Boat to be certified by the French Navy. Subsequently, a wooden transom was created and then patented in 1943. On modern Inflatable Boats, you will be able to distinguish the commonalities between the 1937 model and today's model.

As with many things, World War II changed the need for and thereby the industry on Inflatable Boats. Submarine attacks in the Battlefield of the Atlantic created escalated numbers of casualties among merchant ships as well as the many warships.

Now the US warships started to use rubber life rafts. And since the rubber and manufacturing processes were significantly better due to quality increases than in the prior 35 years, the Inflatable was back, bigger and better than ever before, and now it was boat-shaped.

Today's modern Inflatable Boat is no longer just a Life Saving device, it has now crossed over to the recreational side of things due to its low cost of entry and it varied use. If you are looking for a boat on a budget, you definitely need to check out an Inflatable Boat!