A Small Number of Pros and Cons of the Fishin' Buddy Fish Finders

By Denny Keane


Are you seeking an affordable fish finder? Commonly, the fish finders that are not genuinely expensive do not have too quite a few possibilities, but there are some models that could be quite trustworthy in terms of acquiring fish. For example, the Hummingbird fish finders from the Fishin' Buddy series can be classified this way.

Therefore, if you want a fish finder with standard alternatives, with less options, focused only on tracking fish, measuring depth and temperature, a Fishin' Buddy could be a viable selection. Thus, in this report I'm going to concentrate a little on the positive aspects and disadvantages with the Hummingbird fish finders from the Fishin' Buddy series

Fishin' Buddy Hummingbird Fish Finders - Pros

1. They're cheap. Probably the most high-priced Fishin' Buddy goes up to about 260 bucks, and only simply because it features a color LCD screen. But in my personal opinion, you don't truly will need a color screen on a modest fish locating unit like this, so it would be a little of a spend to go for the 140c type. If you are going for a Fishin' Buddy, I'd advocate the 120 or 110 types, which price about $120-$140.

2. You do not must mount the transducer. Any Hummingbird fish finder, or need to I say, any type of fish finder comes with a transducer that should be attached inside a way or a different towards the hull of one's boat. A Fishin' Buddy has its transducer at the finish of a plastic pole. All you must do is attach the fish finder to the side of your boat, placing the transducer inside the water and you will be prepared to track fish.

3. Fishin' Buddy fish finders have side scan. Properly, only the two superior models, the 120 and 140c. This feature is nice to have specially if you are fly fishing or spooning for pike at the surface.

4. All operate with AA batteries. As well as a full set of AA batteries need to final for 25-30 hours.

Fishin' Buddy Depth Finders - Points Against

1. The plastic pole where the transducer is attached will not be that extended, plus the transducer must be submerged. So, if you are fishing from a boat with a higher hull, probabilities are you currently will not be capable of use your fish finder simply because the plastic pole using the transducer is also brief. It really is critical for you personally to understand that this series of fish finders is created for tiny boats, or even float tubes.

2. Salt water corrodes them, so maintain moisture away from them, if you're fishing in salt water.




About the Author:



Posted byBertie at 2:54 AM

0 comments:

Post a Comment